Underneath you will find information on the latest firmware updates.
Click the panes to read more.
When you navigate to the Update submenu your display looks something like this: Press Play to enter the submenu. Your display now looks something like this: Press Play again to check for firmware updates on the internet. If there is a firmware update available this will start downloading and installing automatically. NOTE: Your product must be connected to a network with internet access. WARNING: Do not remove the power or network cable during update! If you are experiencing network issues, please see these troubleshooting tips.How to update
- Press and hold the play button on your remote to enter the device menu.
- In the Info submenu, you can see which software version you have.
- In the Update submenu, you can download the newest firmware for your product.
Once finished your product will reboot and the new firmware has been installed.
Note: This is a big update that will take about 5-10 minutes to complete. If the update freezes and isn't finished within 30 minutes, please remove the power cord for 30 seconds and try updating again. Version p5123.32
Released April 10, 2023
- TV remote feature implemented
- Startup volume and Max volume control menu selection added
- Force update menu selection added
- New update structure
- General improvements (minor bugfixes)
See our Device Menu page for detailed instructions on how to use the new features.
The update will normally continue by itself even if there is no visible light in the display. You should see the lights by the Ethernet connection at the back of the amp flashing, the update will finalize after downloading the second part of the firmware. This process could in some cases take up to one hour.
*Only applicable to standby versions of the H590Version p5119.2002
Released August 22, 2022
- Added Roon Ready
- Volume range changed to 0-100
- Maximum volume level user setting changed.
Please see "Set max volume level" in the latest user manual.
- Startup volume changed to maximum startup volume.
The amplifier will start in the volume last used or in the maximum startup volume.
- Added sleep timer notification*
The display will notify when entering standby in less than 5 minutes.
- General improvements (minor bugfixes)
*Released for standby versions of H590. The release date for non-standby versions TBA.Version p5107.19
Released August 3, 2021*
- RC8 button hold fix
** Issue only present on stanby-versions of H590
*Released for standby versions of H590. The release date for non-standby versions TBA.Version p5107.18
Released December 3, 2020*
- Improved display backward compatibility
- Bugfix: USB could in some rare cases play at the wrong speed**
- Bugfix: Corrected mute/unmute sequence
- General improvements (minor bugfixes)
** Issue only present on stanby-versions of H590
*Released for standby versions of H590.Version p5107.1701
Released September 2, 2020*
- Bugfix: Network module rebooted when going out of standby**
** Issue only present on stanby-versions of H590
*Released for standby versions of H590. The release date for non-standby versions TBA.Version p5107.17
Released August 8, 2020*
- Bugfix: High-res files not working properly on UPnP
- Improved streaming volume feedback
- General improvements (minor bugfixes)
** Issue only present on stanby-versions of H590
Version p5093.14
Released June 28, 2019*
- General improvements (minor bugfixes)
*This is the latest firmware released for non-standby versions of H590
We recommend using the latest available firmware version, so please keep your Hegel amplifier up to date. We recommend checking for updates in the menu from time to time.
Some network switches and other network components might block downloading new firmware, leading to a failed or aborted update. This is usually solved by connecting your amp with an Ethernet cable directly to your router.
Please contact us if you have questions.